News

How to Replace a Fill Valve in your Toilet

wc

1 shut off the water at the supply, turn the handle clockwise to the right until tight

2 flush water in tank down toilet, i recommend using a shot vac to vacuum out the remaining water on the bottom to prevent a mess

3 remove braided hose feeding fill valve, this should only be hand tight

4 remove nut thake secures the new valve to toilet with channel locks

5 install new valve, make sure rubber seal is on the inside of tank, tighten nut with channel locks

6 tighten braided hose on to valve hand tight

7 turn water back on slowly, place plastic tube in tank centre

8 check height of water and valve operation, flush a few times to make sure its operating properly

9 your new valve is now installed in less than 10 minutes

How Your Roof Affects Your Electric Bill
5 Air Conditioner Repair Tips You Can Do Yourself
 

Comments

No comments made yet. Be the first to submit a comment
Already Registered? Login Here
Guest
Monday, 23 September 2019
If you'd like to register, please fill in the username, password and name fields.

Top Articles

Random Posts

Translate Site

Company

LINKTOSALE.COM.AU PTY.LTD.
ABN: 77 626 273 050
Perth, WA 6036

Subscribe To Our Newsletter

0
Shares
Cron Job Starts